Proaim Kite-33 Titan Package
- HI STRENGTH 33 FEET TELESCOPIC CAMERA CRANE SYSTEM for cameras weighing up to 20 kg
- OCTAGONAL SHAPED, STRONG AND VERSATILE JIB Arm is made of High Grade Aluminium ensures high end production.
- MODULARLY DESIGNED EXPANDABLE PROFESSIONAL jib crane can be used at different shooting lengths.
- ALUMINIUM HEAVY DUTY JIB STAND & spreader support heavy loads for high stability.
- REAR CONTROL CENTER HAS PROVISIONS for mounting the Joystick Control box, LCD Monitor & Zoom Controller.
- HI STRENGTH 33 FEET TELESCOPIC CRANE SYSTEM for cameras weighing up to 20 kg is made of High Grade Aluminium HE30 ensures high end production.
- MODULARLY DESIGNED OCTAGONAL SHAPED jib arm is expandable from 4ft (one section) to 33ft (Ten section) in 3ft increments with 1ft overlaps between sections.
- TAIL EXTENTION METHOD (TEM) saves your precious time and energy. The 2ft tail section reduces the counter weight to just half.
- ALUMINIUM HEAVY DUTY JIB STAND & spreader with maximum height of 7.2ft has double locking system and support heavy loads that ensures high stability.
- PORTABLE AND SMOOTH THREE LEG FLOOR DOLLY has smooth 360 degree rotating wheel bearings and includes Build-in wheel lock for stability.
- ALUMINIUM CONSTRUCTED 3-AXIS MOTORIZED PAN TILT HEAD Supports Cameras weighing up to 15kg/33lbs and includes three 12V high torque DC motors.
- Includes COMPLIMENTARY Proaim E-Focus & Zoom Control kit, Proaim 12v Battery Power Pack and Proaim Lanc Zoom Controller.
- HIGH IMPACT PROTECTIVE PACKING for carrying, transporting and storing your valuable equipment.
|Camera Jib Arm Material||High Grade Aluminum HE30|
|Height from Ground||33ft(10.04 Meter)|
|Camera Jib Arm Thickness||3mm|
|Camera Jib Crane Length||33ft (10.05 Meter)|
|Jib each Arm length||3.8ft|
|Finish||Black Powder Coated|
|Coupling Jib Arm Sections|| A union coupling design of Jib Arm is
done by washer and Steel bolt
and shank with external clamps as well as Pin Lock for double locking
|Camera Jib Arm Break downs to||10 Sections of 4ft each|
|Camera Platform Leveling||By Control Cable|
|Stress cable||High carbon steel with electro galvanized 4mm tested wire at 900kg|
|Multiple Alignment|| Multiple user friendly alignment of Stress Cable is
making Jib Stand straight without any curve
|Max Camera Package Load Capacity||20kg (45lbs)|
Add Counter Weights in the rear section
of Jib according to Camera and Pan Tilt
Head weight as per this chart
The Telescopic jib has a varying weight ratio depending
on the |
length you have chosen.
The 33ft arm itself balances at about 220lbs. Just multiply the weight,
of the additional items you will put on the end of the arm, by 6 and
you will know how much weight to buy. Buy a few extras in case you
add other accessories.
PAN TILT HEAD
|Maximum camera weight capacity||15kg /33lbs|
|Pan movement||360 degrees|
|Tilt movement||360 degrees|
|Speed Control|| Variable-controlled speed from 6
degrees/sec (low speed) to 51 degrees/sec
|Maximum height of head||24 inch|
|Material Used|| Precision machined parts with the
highest standards of industrial grade
|AC Adapter input||AC 100 - 240V ; output - DC 24V -3A|
|Two Motors||Has Three high, coreless DC motors that rotates the head at 360 degrees.|
|CAMERA JIB COMPARISON||PROAIM 33ft CAMERA JIB CRANE||OTHER|
|Finish|| Hard Black Powder Coated for
|Shape|| Octagonal (Re-enforced
engineering for Triple Strength)
|Telescopic||Yes||No (fits into very heavy 3' x 3' x 4.5')|
|Assembly||Within 30 minutes||Takes more than 55 minutes for setup|
|Material||High Grade Aluminum||Aluminum|
|Stand|| Heavy Duty Jib Stand (HD-STD)
| Others recommend photography Tripod
Stand that is not recommended for jib
|Spreader|| Heavy Duty Aluminum Spreader
Included for high stability
|Packing|| Lightweight High Impact
Professional Hard case Packing
| Heavy Bulky packing made out of board
and aluminum and has equal weight as of
|JIB STAND SPECIFICATIONS|
|Material Used||Rock Solid Heavy duty Jib stand (HD-STD) made of solid aluminum is foundation of Jib Crane|
|Hub Assembly Material||High Grade aluminum HE30|
|Stand Legs||Has double locking system (aluminum knob and Steel Pin Lock system as well) fully extendable.|
|Carrying Case size||34 inches|
|Spreader Max Opening from center||2.4ft|
|Spreader Feet||Made of solid aluminum with Steel Lock Pin|
> Proaim 33ft Long Telescopic Camera Crane with Accessories
> Proaim Heavy Duty Camera Crane Stand (HD-STD) with spreader
> PROAIM Spin-3 (3-Axis) Motorized Dutch Roll Pan Tilt Head (PT-SPIN-3) (Added on 25-July-2016)
> Proaim D33 floor dolly
> Power pack
> Zoom Controller
Fantastic jib!! Its extension gives me great reach while getting big rising and dropping shots. Thanks a ton Proaim...
By Mr. Giles, Zimbabwe
Great Product great quality, excellent value. Perfect addition ta my equipment! Keep Rocking
By Mr. Jaxon, Sudan
Very nice tool for video production! Great for smooth movement, allows easy operation in both tight and larger spaces
By Mr. Finlay, Switzerland
Awesome, Great for commerclal shoots easy to set up and easy to use.
By Mr. Euam, Belgium
Really nice, perfect quality, good construction, everything arrived in good condition & great customer service.
By Mr. Subie, Germany