Proaim Kite-22 Ultimate Package
- Expands from 4' - 22' in 3' increments.
- 1' overlap between sections.
- Unused sections store in the tail reducing counterweight.
- Jib sections collapse into each other for compact storage.
- Operator control center has provisions for mounting Joystick control, LCD monitor, zoom controller.
- HI STRENGTH 22 FEET TELESCOPIC CRANE SYSTEM for Cameras up to 20 kg/44 lb offers smooth, consistent and great performance.
- STRONG AND VERSATILE JIB Arm is Octagonal in shape and is made of High Grade Aluminium HE30 which ensures High End Production.
- MODULARLY DESIGNED EXPANDABLE JIB ARM from 4ft (1 section) to 22ft (7 sections) in 3ft increments with 1ft overlaps between sections.
- STORE UNUSED SECTIONS IN TAIL SECTION as ballast weight and lighten your counterweight demand.
- ALUMINIUM HEAVY DUTY JIB STAND with spreader has double locking system and support heavy loads that ensures high stability.
- PORTABLE AND SMOOTH THREE LEG FLOOR DOLLY has smooth 360 degree rotating wheel bearings and includes Build-in wheel lock for stability.
- ALUMINIUM CONSTRUCTED 3-AXIS MOTORIZED PAN TILT HEAD Supports Cameras weighing up to 15kg / 33lbs and includes three 12V high torque DC motors.
- FLAWLESS & ENDLESS 360 degree panning, tilting and rolling movement with reversal points. BUILT-IN SLIP RINGS offer Continuous rotation without tangling of wires.
- SPEED EASILY CONTROLLED AND ADJUSTED by "Speed" and "Dead Spot" knobs on the joystick control unit.
- COMPLIMENTARY Proaim E-Focus & Zoom Control kit provides precise control of zoom & focus with a remote focus & zoom dial.
- Also Includes Complimentary Proaim Lanc Zoom Controller.
- REAR CONTROL CENTRE of Crane has provisions for mounting the Joystick Control box, LCD Monitor & Zoom Controller.
- HIGH IMPACT PROTECTIVE PACKING for carrying, transporting and storing your valuable equipment.
- DYNAMIC & FLEXIBLE crane system with extra smart features offers 100% Satisfaction Guarantee.
SPECIFICATIONS OF TELESCOPIC JIB ARM
|Jib Arm Material||High Grade Aluminum HE30|
|Jib Arm Shape||Octagonal|
|Height from Ground||20ft|
|Jib Arm Thickness||3mm|
|Jib Crane Length||22ft (6.7 Meter)|
|Jib each Arm length||4ft|
|Finish||Black Powder Coated|
|Coupling Jib Arm Sections||
A union coupling design of Jib Arm is done by washer and Steel
bolt and shank with external clamps as well as Pin Lock for double
|Jib Arm Break downs to||7 Sections of 4ft each|
|Camera Platform Leveling||By Control Cable|
High carbon steel with electro
galvanized 4mm tested wire at
Multiple user friendly alignment of Stress Cable is provided for
making Jib Stand straight without any curve
|Carrying Case size||51 inches|
|Jib Crane Weight||30kg (66lbs)|
|Max Camera Package Load Capacity||45lbs (20kg)|
|TELESCOPIC JIB ARM DIMENSIONS|
|Jib Arm Octagonal Tube||Outer Diameter||Inner Diameter|
|Ist Section(weight section)||164mm||156mm|
|7th Section (Top Section)||104mm||96mm|
|Height of Jib Arm Crane while Stand Adjusted at Maximum height of 5ft||
20ft high at 22ft length
-> 17.4ft high at 19ft length
-> 15ft high at 16ft length
-> 12ft high at 13ft length
-> 9ft high at 10ft length
-> 6ft high at 7ft length
Add Counter Weights in the rear section
of Jib according to Camera and Pan & Tilt
Head weight as per this chart
The jib arm crane has a varying weight ratio depending on the length you have chosen.
The 22ft arm itself balances at about 137.5lbs. Just multiply the weight, of the additional items you will put on the end of the arm, by 5 and you will know how much weight to buy. Buy a few extras in case you add other accessories.
19ft arm balances at about 88lbs - Multiply the weight, of the additional items you will put on the end of the arm, by 4 & add the weights accordingly.
16ft arm balances at about 49lbs - Multiply the weight, of the additional items you will put on the end of arm, by 3.5 & add the weights accordingly.
13ft arm balances at about 27lbs - Multiply the weight, of the additional items you will put on the end of arm, by 2 & add the weights accordingly.
10ft arm balances at about 7.4lbs - Multiply the weight, of the additional items you will put on the end of arm, by 1.8 & add the weights accordingly.
|PAN TILT HEAD - SPECIFICATIONS|
2- Brass Small Gears (Dia- 14mm),
1- Brass Small Pan Gear (Dia-22mm)
6 Pin XLR
HEAVY DUTY STAND SPECIFICATIONS
|Material Used||Rock Solid Heavy duty Jib stand (HD-STD) made of solid aluminum is foundation of Jib Crane|
|Hub Assembly Material||High Grade Aluminum HE30|
|Hub Assembly Dimensions||Inner Dia : 137mm Outer Dia : 150mm|
|Jib Stand Legs||Has double locking system (Aluminum knob and Steel Pin Lock system as well) fully extendable.|
|Stand Height when Collapsed||3ft|
|Stand Height when opened||Max : 4ft 9 inch|
|Distance from Center||22 inch|
|Carrying Case size||34 inches|
|Spreader Max Opening from center||2.4ft|
|Spreader Feet||Made of solid aluminum with Steel Lock Pin|
|Stand Weight||33lbs (15kg)|
SPEFICATIONS OF D-33 DOLLY
|Maximum Load capacity||300kg|
|Material Used||MS powder coated|
|Bolts||Steel bolts with washers|
Folded (L x w x h) 84 x 28 x 22 cm
Doorway Width - 144cm
|Height From Ground||9 inch|
Weight of Dolly
|Dolly Type||Three leg Floor dolly|
> Proaim 22ft Long Telescopic Jib Arm Crane with Accessories
> Spin 3-Axis Dutch Roll Pan & Tilt Motorized Head with Accessories( Revised on 25-July-2016 )
> Heavy Duty Stand (HD-STD) with Spreader
> D-33 Camera Dolly
> Zoom Controller
First time using the service and will use forever. Great Experience
By Mr. BenA, Russia
Incredibly pleasant experience. Subject of excellent workmanship, professional and serious seller.
By Mr. Simon Barke, Germany
Great product, hard metal structure, great purchase
By Mr. Donya Imnan, Turkey
Unboxed it just now and the monitor works and the crane works smoothly Good
By Mr. Joy, Iran
Super seller. Very helpful and stand behind their sales. Highly recommend
By Mr. Shooper, England