Proaim 14ft Video DSLR Camera Jib  Stand  with Jr pan Tilt Head

Proaim 14ft Video DSLR Camera Jib Stand with Jr pan Tilt Head

Proaim 14ft Camera Crane with Jib Stand and Sr. Pan-Tilt Head

Proaim 14ft Camera Crane with Jib Stand and Sr. Pan-Tilt Head

Proaim 18ft Camera Crane  with Sr. Pan and Tilt Head  Tripod Stand

Proaim 18ft Camera Crane with Sr. Pan and Tilt Head Tripod Stand

Proaim 14ft Video DSLR Camera Jib Stand with Jr pan Tilt Head



PRODUCT HIGHLIGHTS

  • 4 Ribbed sections for superior strength
  • Adjustable Metal Wire System makes our Proaim 14' video DSLR camera jib stable, rigid and with no flexing.
  • Tilting movements are performed with the controlling handle.
  • LCD monitor arm for mounting LCD Monitor.
  • Stronger Hi-tensile weight bar helps achieve perfect balance.

US $795.00
In stock
SKU
P-14-JS-JRPP

Estimated Shipping cost for USA - US $316.00

PRODUCT HIGHLIGHTS

  • HI STRENGTH 14 FEET RECTANGULAR SHAPED JIB ensures vibration free smooth & dynamic shots.
  • CNC MADE ALUMINIUM POWDER COATED construction makes the jib a very strong and stable camera platform to get shots from below or overhead the subject.
  • FOUR FULLY RIBBED SECTIONS give 7 times more strength and heavy duty adjustable metal wire system assures quick and secure assembly without any bending.
  • CENTRAL FORK WITH THRUST ROLLER BEARINGS provide maximum stability, smooth movements and enable to house heavy axial loads and shock loads.
  • STRONG AND STURDY ALUMINIUM BLACK ANODIZED Jib Stand allows quick set-up and its collapsible design makes it portable.
  • ALUMINIUM CONSTRUCTED 2-AXIS MOTORIZED PAN TILT HEAD Supports Cameras up to 6kg (13.2lb) and includes 12 Volt two high torque coreless DC motors.
  • INCLUDES COMPLIMENTARY 12v Battery Power Pack, Tools And Tool Pouch/Wrap, LCD Mounting Arm and Lanc Zoom Controller and Protective Storage Case.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
 14FT RIBBED JIB CRANE SPECIFICATIONS
  Weighing Capacity 6.8kg (15lbs)
 Material Used CNC made Aluminum Powder Coated
 Jib Arm Shape Rectangle
  Jib Arm Break downs into 4 Parts
 Length of Jib sections 3. 5ft each
 Jib Section Jointers Silver Aluminium
 Bearing at Center Fork Pan Thrust bearing with washer made of stainless steel
 Camera Tilt Angles Upto 180 degree
  Locking Pin Stainless steel locking pin for stable or tilt camera angles
 Height Range from ground level 14ft when stand height adjusted at 5.5ft
 Length from tripod to Camera Mount 10.3ft
 Camera Mount plate Square
 Camera Platform Levelling By stress cable Stress Cable made of metal with adjusting Steel hook
 Weight Holder Rod Made of MS Nickel chrome,
Length : 355mm
Dia : 25mm
  Weight Closures 2pc. Made of MS Nickel chrome
  Horizontal Movement Yes
  Vertical Movement Yes
  Horizontal/Vertical movement Lock No
  LCD Mount Provision Yes
 Weight 16 kg

 BALANCING CHART
  Add Counter Weights in the rear section of Jib according to Camera and Pan Tilt Head weight as per this chart : The jib has a varying weight ratio depending on the length you have chosen.

The 14 jib arm itself balances at about11kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 2 and you will know how much weight to buy.

The 12ft jib arm itself balances at about 4kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 2 and you will know how much weight to buy.

The 9ft jib arm itself balances at about 3kg. Just multiply the weight, of the additional items you will put on the end of the arm, by 3 and you will know how much weight to buy.

Buy a few extras in case you add other accessories.


CAMERA JIB STAND

>  Made of Aluminum Black anodized
>   Base spread - 32"- 48"
>  Height adjustment - 44"- 80"
>  Completely collapsed height - 46"
>  Makes the camera jib arm stable & solid as a rock
>  Safety Pin for Secure Pole
>  Weight capacity of the stand is 200lbs (90kg)


  PAN TILT HEAD - SPECIFICATIONS
 Pan Tilt Head Material High Grade Aluminium
  Maximum Camera Package Load Capacity 6kg (13.2lb)
 Pan movement 360 degrees
 Tilt movement 360 degrees
 Speed Variable-controlled speed from 6 degrees/sec (low speed) to 51 degrees/sec (high speed)
Slowest Speed : 2 minutes
Highest Speed : 7 seconds
 Motors Two high torque, coreless DC motors that rotates (pans) and tilts the head 360 degrees
 Gears 2- Brass Small Gears (Dia- 14mm),
2- Brass Small Pan Gear (Dia-22mm)
  Minimum height of head 18.5 inches
 Maximum height of head 22 inches
 AC Adapter input AC 100 - 240V ; output - DC 12V -2A
 Cable Length 7 meter
 Cable Connector 4-Pin XLR
 Battery Cable 3 Meter long
 Weight of Pantilt head 2.7kg (5.9lbs)
  Box Dimensions 52 X 34 X 18 cm
 JOYSTICK CONTROLLER
 Joystick Controller 2-Axis
 Connectors 2x 4-Pin XLR male connectors
 Pan/Tilt Direction Yes
 Upgraded with Damping knob
 Weight 800 grms

>  14ft Video DSLR Camera Jib
>  LCD Monitor Arm
>  Jib Stand
>  Jr. Pan Tilt Head
>  Joystick Box
>  Universal Adapter
>  AC Adapter
>  Cable with Connector
>  FREE ProaimLanc Zoom Controller (P-ZC-3DV)
>  FREE Tools and Tool Pouch/Wrap

          

Joystick control help me to control tilting movement and with it I can easily make smooth shots. Proaim always Rocks!!
By Mr. Yasorp, Austria

This Jib can be also used without Pan Tilt Head. After Simply remove four screws from the Jib. Camera Platform and mount my camera in place of the head. I love my jib.
By Mr. Kqsedr, Turkey

It is a complete kit where as its every part help to improve tilting movements in first shot. So I can work without my Jib.
By Mr. Unider, Belgium

Fabulous Jib !! fabulous Proaim always make perfect product for their customers.
By Mr. Vindub, Canada
My Shots were wrost when I was working without jib. But nw I love my shots, I love my Proaim 14ft jib which give me many happiest movements. Perfect !!!!!!
By Mr. Hannsel, Europe

THECINECITY on INSTAGRAM